Chudidar Stiching Tutorials

técnicos.Parte 11: Fill the

Shut projectors may seem silly ... But not so much when you realize the extra light that always give the projectors and black or serial blackout that bring you not say anything, you can leave the image of your desk in the middle, enlighten the scene to bag or other number of undesirable effects. Now we are all accustomed to watching videos and a series of spectacular visual works great, but then Live reality and change and sometimes these little details did not care much, without further projects over the scene and is a little weird, seeing all the surplus of the keystone, etc. As

Avatar * there are things that we have fairly clear from the different areas that we have encountered during the creation of the show. For example, when we go to a white space where the light bounces a lot, even more important is filled, at least because all trace of light causes to be getting used to the lack of light, you end up looking the square and the shadow it made on or interpreter itself and in our case, sometimes that does not interest us. These details at the end of the day, know they are not religiously important but that does not mean they do not have to be taken into account, should be seen as many others along the visual creation of a project of this type.

With AVATAR * will use one for each projector controlled by DMX with visual programming, this means that when we want a screen shot or blind, we do so in a precise manner, especially with time synchronized and adjusted , as sometimes we use. On other occasions can also be done directly with the light table of course, but the opening times due to the faders, are sometimes not so fast.

Personally and in parallel with the curiosity itched me a sealed, to pieces, and we already now one, but they are expensive. In the video that we show below, you can see the result, it is relatively easy to get the board that operates a servo, an Internet search as DMX Servo , we will address a few manufacturers. The rest is a bit of knowledge about the connections (the manufacturer specifications quite well with diagrams), a welder, small tools and a box to stick it ... If anyone has any questions, ask in the comments ayudare try as much as possible. ;)

R / *